Universal Milling Machine Bed Type
The newest EUMACH bed type universal milling machine, with further innovations in rigidity, accuracy, versatility and performance!
The newest FBE families has been designed to enhance 3D surface finishing together with highest rigidity and versatility; various multi-functioned milling heads all can accomplish with both vertical & horizontal machining at same time once the work piece is being fixed on table. This definitely & greatly increase significantly through done in one operation!
FBE-4000 with 4,000 x 1,000 x 950 (1,500) (mm) travel, 4,100 x 1,050 (mm) table.
- Ideal for large molds, forging dies, and heavy work pieces up to 8,000 kgs weight.
- Machine multi-sides of workpiece with a single set-up. ( With optional milling head & rotary table )
- Universal multi angle universal milling head with hydraulic tool clamping.
- Hydraulic counterbalance on vertical movement.
- Hardened & ground guideways with sliding surfaces coated with turcite anti-friction material.
- Precision large diameter ball scerws on X-Y-Z, rigid mounted.
Super wide interior space for standard top open machines.
Super wide interior space for optional top closed machines.
Rigid & Robust Casting Frame
Direct coupling for optional ORT-2.5, VH-2.5, VH-1 automatic heads. No more horizontal spindle.
Versatile & Flexible Spindle Solution
Remove the standard manual milling head ( or opt. VH-2 head ), a standard horizontal milling spindle is inside of the sliding ram it increases minimum 500 mm working distance from such horizontal spindle to work piece by just removing universal milling head !
Removes head
to be
Heavy cutting operation is possible; its 17 kW / 22 kW spindle motor plus a 1:4 gearbox then an additional pulley ratio, spindle torque can be up to more than 1,000 Nm at 200 RPM.
Versatile various milling heads
Above 3 heads are attachment type, the horizontal spindle is inside of sliding ram; ISO 50 spindle taper and maximum 25 kW / 650 Nm / 3,500 RPM.
Standard manual head
B axis : manual
C axis : manual
Optional VH-2 head
B axis : manual
C axis : automatic 2 positions vertical & horizontal
Optional VH-90
B axis : manual
Above 3 heads are built-in ram type, no more horizontal spindle Inside of the ram; ISO 50 spindle taper and maximum 25 kW / 650 Nm / 3,500 RPM.
Optional ORT-2.5 head
B axis : automatic 2.5° x 144 positions
C axis : automatic 2.5° x 144 positions
Optional VH-2.5 head
B axis : automatic 2.5° x 144 positions
C axis : automatic 2.5° x 144 positions
Optional VH-1 head
B axis : automatic 1° x 360 positions
C axis : automatic 1° x 360 positions
Universal Head Related Dimensions
Specification
Standard Accessories
- 3,500 RPM universal manual milling head.
- Programmable coolant system
- Automatic lubrication system
- Working lamp
- Alarm lamp for abnormal situation
- Indication lamp for dwell & end of job
- Levelling bolts & pads
- RS-232 terminal interface port
- Machine & control manuals
- Toolbox with spanners & wrenches
- 3 axis linear scales, with air blast.
- Heidenhain or siemens control.
Optional Accessories
1. Automatic tools changing
Vertical tool change with 24 stations swing arm type
Horizontal tool change whth 32, 40 or 60 stations swing arm rail type
2. Pure horizontal long nose spindle, no more standard universal milling heads, speed up to 6,000, 8,000 or 10,000 RPM, direct coupling.
3. YZC machine
Engineering adapted to satisfy customer requirement.
Based on 25 years milling machine engineering experience, Eumach has been successfully delivering many machines for Customers' specified jobs and always oriented towards high Productivity such as following example - a machining unit with controlled Y/Z/C (rotary table) for machining large bearing ring and steel disk etc. large round parts.