Bridge Type Machining
The newest eumach bridge type vertical machining center not only with further innovations in rigidity, accuracy, speed and heavy cutting but also for true die / mold evolution.
Totally cover rear side with very wide opening twin doors for convenient clean & service.
Large workpiece load & traverse capacity
2,200 mm x 1,750 mm x 750 mm traverse, 1,750 mm twin column distance, 2,100 mm x 1,600 mm table size with up to 6,000 kgs workpiece load.
The right control in the right position
A swivel control panel located in right side of machine, easily move to the most suitable position to make the operator's job more straight-forward and enhances safety and productivity.
Automatic tool changer
A disk type 16 stations automatic tool changer provides as standard
Swing Arm ATC
Double swing arm with 24, 32, 40, 60 stations automatic tool changer provides as optional.
Roller guideways & ballscrews
The high rigid & heavy duty roller type linear motion guideways on 3 axes to provide low starting inertia, low friction and high acceleration, rates optimizing servo drive and ensure machine response immediately & precisely for high speed cutting requirements, especially in rapid positioning and contouring cutting.
Compact & clear guardings
Full cover for all electrics, water cooler, transformers, pneumatics etc. for a clean environment & convenient after service.
Rigid Overall Machine Design & Superior Features
Super wide & high rigid one piece castings twin columns
The very wide distance 1,750 mm between twin column, allowing the most convenience mounting of large workpiece, fixture etc. The high column compare to competitors is extremely useful for tall workpiece and those which requires long cutting tools.
Integrated ballscrew mounting brackets
The mounting brackets for 3 axes are being integrated on the bridge base and saddle castings for the maximum rigidity, the ballscrews are mounted on both ends to prevent heat generated by respective high speed positioning from affecting positioning accuracy.
Powerful Motor Spindle
Satisfy most of various applications, from roughing to finishing even in very tough materials such as tool steels.
|Max. speed ( RPM )||18,000||24,000||15,000|
|Rated speed ( RPM )||1,000||2,000||1,000|
|Housing dia. ( mm )||210||210||230|
|Power S1 / S6 ( kW )||26 / 32||21 / 27||42 / 53|
|Torque S1 / S6 ( Nm )||124 / 154||85 / 116||200 / 250|
|Bearings dia. ( mm )||70||70||70|
Fanuc Oi-MD / 31i-MB
Heidenhain iTNC-530 / 640
Siemens 840D / 828D
|Overall size ( mm )||2,100 x 16,00|
|T-Slot ( mm )||22 x 9 x 180|
|Maximum loading ( kgs )||6,000|
|X axis ( mm )||2,200 table in & out|
|Y axis ( mm )||1,750 head left & right|
|Z axis ( mm )||750 head up & down|
|Between 2 columns ( mm )||1,750|
|Spindle to table top ( mm )||152 ~ 902|
|Motor||S1 : 26 kW / 24 Nm|
|Taper||HSK-A63 ( BT#40)|
|Speed ( RPM )||18,000 ( 24,000 )|
|Cutting ( m / min )||up to 20|
|Rapid x / y / z ( m / min )||24 / 30 / 30|
|Minimum setting ( mm )||0.001|
|Automatic tool changer|
|No. of tools||carousel armless 16 ( swing arm 32 )|
|Max. tool DIA. / length ( mm )||80 / 250|
|Max. tool weight ( kgs )||7|
|Coolant & Lubrication|
|Coolant tank volume ( liters )||300|
|Pneumatic required ( kgf / cm2 )||7|
|Lubrication tank ( liters )||4|
|Position ( mm )||VDI 3441 : P 0.010|
|Repeatability ( mm )||VDI 3441 : PS 0.005|
|Roundness ( mm )||0.01 / 300 DIA.|
|Machine net weight ( kgs )||20,000|
- Full guard with roof
- Armless ATC
- Coolant system
- Spindle air blast
- Auto. lubrication
- Working lamp
- Alarm light
- Levelling pads & bolts
- Adjusting tools & box
- 18,000 RPM motor spindle & water cooler
- Tool length & radius measurement
- Workpiece probe
- Coolant thru spindle device
- Tool laser measurement
- 32 / 40 / 60 swing arm ATC
- Axis linear glass scales