Eumach Co., Ltd.| Machining Center Taiwanese Manufacturer

Universal Milling Machine Bed Type

The newest EUMACH bed type universal milling machine, with further innovations in rigidity, accuracy, versatility and performance!

The newest FBE families has been designed to enhance 3D surface finishing together with highest rigidity and versatility; various multi-functioned milling heads all can accomplish with both vertical & horizontal machining at same time once the work piece is being fixed on table. This definitely & greatly increase significantly through done in one operation!

FBE-3000 with 3,000 x 1,000 x 950 (1,500) (mm) travel, 3,100 x 1,050 (mm) table.

FBE-3000 with optional top closed full guard.

Ideal for large molds, forging dies, and heavy work pieces up to 8,000 kgs weight.
Machine multi-sides of workpiece with a single set-up. ( With optional milling head & rotary table )
Universal multi angle universal milling head with hydraulic tool clamping.
Hydraulic counterbalance on vertical movement.
Hardened & ground guideways with sliding surfaces coated with turcite anti-friction material.
Precision large diameter ball scerws on X-Y-Z, rigid mounted.

Super wide interior space for standard top open machines.

Super wide interior space for optional top closed machines.

Rigid & Robust Casting Frame

AStandard version with horizontal spindle inside, for standard manual head or optional VH-2, VH-90 heads.

BThe generously dimensioned guideways ensure a high permanent precision supported by specially hardened vertical and horizontal guideways at column and milling carriage, while the counter-guide- ways are coated with Turcite-B.

CDue to the precisely defined and constant clamping of the uide, a stable and exactly defined gap size is generated between bed guideway and table saddle (Turcite-B coated and specially shaved), independently of the respe- ctive table load.

Direct coupling for optional ORT-2.5, VH-2.5, VH-1 automatic heads. No more horizontal spindle.

Versatile & Flexible Spindle Solution

Remove the standard manual milling head ( or opt. VH-2 head ), a standard horizontal milling spindle is inside of the sliding ram it increases minimum 500 mm working distance from such horizontal spindle to work piece by just removing universal milling head !

Removes head

to be

Heavy cutting operation is possible; its 17 kW / 22 kW spindle motor plus a 1:4 gearbox then an additional pulley ratio, spindle torque can be up to more than 1,000 Nm at 200 RPM.

Versatile various milling heads

Above 3 heads are attachment type, the horizontal spindle is inside of sliding ram; ISO 50 spindle taper and maximum 25 kW / 650 Nm / 3,500 RPM.

Standard manual head

B axis : manual

C axis : manual

Optional VH-2 head

B axis : manual

C axis : automatic 2 positions vertical & horizontal

Optional VH-90

B axis : manual

Above 3 heads are built-in ram type, no more horizontal spindle Inside of the ram; ISO 50 spindle taper and maximum 25 kW / 650 Nm / 3,500 RPM.

Optional ORT-2.5 head

B axis : automatic 2.5° x 144 positions

C axis : automatic 2.5° x 144 positions

Optional VH-2.5 head

B axis : automatic 2.5° x 144 positions

C axis : automatic 2.5° x 144 positions

Optional VH-1 head

B axis : automatic 1° x 360 positions

C axis : automatic 1° x 360 positions

Universal Head Related Dimensions

Milling heads	Model	A	B	C	D	E	F	G	H	I
FBE-3000	Standard manual head	1,016 ( 1,576 )	66 ( 76 )	147	197	900	1,048 ( 1,608 )	98 ( 108 )	115	165
	Optional Automatic VH-2	971 ( 1,531 )	21 ( 31 )	27	77	900	1,021 ( 1,581 )	71 ( 81 )	-23	27
	Optional Automatic VH-1	934 ( 1,494 )	-16 ( -6 )	104	154	900	963 ( 1,523 )	13 ( 23 )	74	124
	Optional Automatic VH-2.5	955 ( 1,515 )	5 ( 15 )	125	175	900	985 ( 1,545 )	35 ( 45 )	95	145

Specification

( ) Option

Model	FBE-3000
Table
Working area ( mm )	3,100 × 1,050
T slots ( size x no ) ( mm )	22H8 × 7 slots
Top to floor distance ( mm )	900
Load ( evenly distributed ) ( kg )	8,000
Travel
X axes ( mm )	3,000
Y axes ( mm )	1,000
Z axes ( mm )	950 ( 1,500 )
Horizontal spindle ( no more if with VH-2.5, VH-1 head )
Taper	DIN 67871 #50
Speed ( RPM )	3,500 ( 5,000 )
Output 40% duty cycle ( kW )	25
Constant Output ( kW )	17
Maximum torque S1 ( Nm )	650
Universal milling head
Taper	DIN 67871 #50
Speed ( RPM )	3,500
Output 40% duty cycle ( kW )	25
Constant Output ( kW )	17
Maximum torque S1 ( Nm )	650
Feed Rates
Cutting ( mm / min )	1 - 5,000
Rapid ( mm / min )	10,000
Ballscrews
X axis dia. x pitch ( mm x mm )	Ø63 x 10
Y axis dia. x pitch ( mm x mm )	Ø50 x 10
Z axis dia. x pitch ( mm x mm )	Ø50 x 10
Precision class ( mm / 300 mm )	0.008 / 300
Accuracy
Positioning ( mm / 300 mm )	JIS 6338 : ± 0.005 mm / 300 mm VDI 3441: P0.014 mm
Repeatability ( mm )	JIS 6338 : ± 0.003 mm VDI 3441: PS0.01 mm
Roundness ( mm / dia. )	JIS 6338 : ± 0.01 mm / 300 mm dia.
General
Net weight ( kg )	18,000
Pneumatic required ( kg / cm² )	6
Hydraulic required ( kW )	3.5
Power required ( KVA )	35

Standard Accessories

3,500 RPM universal manual milling head.
Programmable coolant system
Automatic lubrication system
Working lamp
Alarm lamp for abnormal situation
Indication lamp for dwell & end of job
Levelling bolts & pads
RS-232 terminal interface port
Machine & control manuals
Toolbox with spanners & wrenches
3 axis linear scales, with air blast.
Heidenhain or siemens control.

Optional Accessories

1. Automatic tools changing

Vertical tool change with 24 stations swing arm type

Horizontal tool change whth 32, 40 or 60 stations swing arm rail type

2. Full guarding ( top closed sliding roof )

3. Pure horizontal long nose spindle, no more standard universal milling heads, speed up to 6,000, 8,000 or 10,000 RPM, direct coupling.

4. YZC machine

Engineering adapted to satisfy customer requirement.

Based on 25 years milling machine engineering experience, Eumach has been successfully delivering many machines for Customers' specified jobs and always oriented towards high Productivity such as following example - a machining unit with controlled Y/Z/C (rotary table) for machining large bearing ring and steel disk etc. large round parts.