LBM-2000
LBM-2000
- Positioning ( mm ) / VDI 3441 : P 0.010
- Repeatability ( mm ) / VDI 3441 : PS 0.005
- Roundness ( mm ) / 0.01 / 300 DIA.
- Net weight ( kgs ) / 20,000
Large workpiece load & traverse capacity
2,200 mm x 1,750 mm x 750 mm traverse, 1,750 mm twin column distance, 2,100 mm x 1,600 mm table size with up to 6,000 kgs workpiece load.
The right control in the right position
A swivel control panel located in right side of machine, easily move to the most suitable position to make the operator's job more straight-forward and enhances safety and productivity.
Automatic tool changer
A disk type 16 stations automatic tool changer provides as standard
Swing Arm ATC
Double swing arm with 24, 32, 40, 60 stations automatic tool changer provides as optional.
Roller guideways & ballscrews
The high rigid & heavy duty roller type linear motion guideways on 3 axes to provide low starting inertia, low friction and high acceleration, rates optimizing servo drive and ensure machine response immediately & precisely for high speed cutting requirements, especially in rapid positioning and contouring cutting.
Compact & clear guardings
Full cover for all electrics, water cooler, transformers, pneumatics etc. for a clean environment & convenient after service.
| Model | LBM-2000 |
|---|---|
| Table | |
| Overall size ( mm ) | 2,100 x 16,00 |
| T-Slot ( mm ) | 22 x 9 x 180 |
| Maximum loading ( kgs ) | 6,000 |
| Travel | |
| X axis ( mm ) | 2,200 table in & out |
| Y axis ( mm ) | 1,750 head left & right |
| Z axis ( mm ) | 750 head up & down |
| Distance | |
| Between 2 columns ( mm ) | 1,750 |
| Spindle to table top ( mm ) | 152 ~ 902 |
| Spindle | |
| Motor | S1 : 26 kW / 24 Nm |
| Taper | HSK-A63 ( BT#40) |
| Speed ( RPM ) | 18,000 ( 24,000 ) |
| Feedrate | |
| Cutting ( m / min ) | up to 20 |
| Rapid x / y / z ( m / min ) | 24 / 30 / 30 |
| Minimum setting ( mm ) | 0.001 |
| Automatic tool changer | |
| No. of tools | carousel armless 16 ( swing arm 32 ) |
| Max. tool DIA. / length ( mm ) | 80 / 250 |
| Max. tool weight ( kgs ) | 7 |
| Coolant & Lubrication | |
| Coolant tank volume ( liters ) | 300 |
| Pneumatic required ( kgf / cm2 ) | 7 |
| Lubrication tank ( liters ) | 4 |
| Accuracy | |
| Position ( mm ) | VDI 3441 : P 0.010 |
| Repeatability ( mm ) | VDI 3441 : PS 0.005 |
| Roundness ( mm ) | 0.01 / 300 DIA. |
| Machine net weight ( kgs ) | 20,000 |